Configuration from Embedded Web Server
Setting Up a Macintosh Computer
1. At a Macintosh computer, from the Apple menu,
select Chooser.
2. The Chooser window then displays an Apple Zone
list. Select the Zone name that you specified when
configuring the PRINT SERVER.
Note: If you select a Zone that the PRINT SERVER
doesn’t belong to, as you specified in the previous
section, no print server will be displayed in the Step
4.
3. If you are using a PostScript printer you can select
the LaserWriter 8 icon.
4. The Chooser window then displays PRINT SERVER
(s) featuring the support for AppleTalk protocol, along
with its default Chooser Name in the right-hand
Select A PostScript Printer dialog box.
Note: You may change the default Chooser name and
Zone name of a PRINT SERVER by using your web
browser before proceeding with this installation.
Please see the previous section in this chapter for
details.
5 - 25
To Next Page
Loading...
Need help?
Ports & interfaces