Configuration from Embedded Web Server
Device Name: This option allows you to input device name
of the print server. To correct the print
server’s device name.
System Contact: This option allows you to input contact
name of the print server. To check the
print server’s contact name who in
charge of this device.
System Location: This option allows you to input Location
name of the print server. To confirm
the print server’s location name where
the print server is located in the
office’s LAN.
Password: This option allows you to input setup password
of the print server. When you select setup
menu of web configuration from the print
server, it then as shown in the following
picture.
5 - 12
To Next Page
Loading...