Network Print Monitor
Windows 95/98/Me/NT/2000/XP/2003
Installation Procedure
Please perform the steps as follows to ensure a smooth
installation:
1. Run Setup from the print server’s NetWare, Win
95/98/Me/NT/2000 Setup diskette
2. The Network Print Monitor for Windows
95/98/Me,NT/2000/XP/2003 Setup will then appear.
Click Next.
3. A message reading, “Setup is complete. You may add
the Network Print Port by using the PSAdmin” will
appear. Click OK.
4. Click Start, point to Settings, and select Printers.
5. Double-click the Add Printer icon.
6. Select Local Printer and click Next.
7. Select the appropriate printer manufacturer and
printer type and click Next.
8. Select LPT1 and click Next.
9. Type in the Printer Name and click Next.
6 - 5