Network Print Monitor
If the IPX/SPX protocol is not installed, no print server
will be shown in the display box. Then please select
TCP/IP or NetBEUI alternatively.
It starts again to search for the print server on the
network by using the protocol you specify in the step
above. When finished, the print server will be
displayed along with the its Node ID, as shown in the
following picture. (The last 6 digits of the Node ID,
located on the back of the print server unit). Select
one of the print server’s ports from the list.
Notice:
Parallel port is Port 1(PID1)
USB1 port is Port 2(PID2)
USB2 port is Port 3(PID3)
6 - 8
To Next Page
Loading...
Need help?
Ports & interfaces