Identification Cerabar M, Deltabar M, Deltapilot M / 4...20 mA HART
8 Endress+Hauser
2.1.2 Identifying the sensor type
In the case of relative pressure or gauge pressure sensors, the "Pos. zero adjust" parameter appears
in the operating menu ("Setup" -> "Pos. zero adjust").
In the case of absolute pressure sensors, the "Calib. offset" parameter appears in the operating menu
("Setup" -> "Calib. offset").
2.2 Scope of delivery
The scope of delivery comprises:
• Device
• CD-ROM with documentation
• Optional accessories
Documentation supplied:
• Operating Instruction BA00382P, Technical Information (TI00436P Cerabar M / TI00434P
Deltabar M / TI00437P Deltapilot M) and the Brief Operating Instructions can be found on the
documentation CD provided. ä 2, "Overview of documentation" section.
• Brief Operating Instruction: KA01030P Cerabar M / KA01027P Deltabar M / KA01033P
Deltapilot M
• Final inspection report
• Additional Safety Instructions for ATEX, IECEx and NEPSI devices
• Optional: factory calibration form, test certificates
2.3 CE mark, Declaration of Conformity
The devices are designed to meet state-of-the-art safety requirements, have been tested and left the
factory in a condition in which they are safe to operate. The devices comply with the applicable
standards and regulations as listed in the EC Declaration of Conformity and thus comply with the
statutory requirements of the EC Directives. Endress+Hauser confirms the conformity of the device
by affixing to it the CE mark.
2.4 Registered labels
KALREZ, VITON, TEFLON
Registered label of E.I. Du Pont de Nemours & Co., Wilmington, USA
TRI-CLAMP
Registered label of Ladish & Co., Inc., Kenosha, USA
HART
Registered label of the HART Communication Foundation, Austin, USA
GORE-TEX
®
Registered label of W.L. Gore & Associates, Inc., USA
To Next Page
Loading...
Need help?
General
