Incoming acceptance and product identification Deltabar PMD75B HART
12 Endress+Hauser
4 Incoming acceptance and product
identification
4.1 Incoming acceptance
A0016870
• Is the order code on the delivery note (1) identical to the order code on the product
sticker (2)?
• Are the goods undamaged?
• Do the data on the nameplate correspond to the order specifications and the delivery
note?
• Is the documentation provided?
• If required (see nameplate): are the Safety Instructions (XA) provided?
If you can answer "no" to any of these questions, please contact Endress+Hauser.
4.1.1 Scope of delivery
The scope of delivery comprises:
• Measuring device
• Optional accessories
Documentation supplied:
• Brief Operating Instructions
• Final inspection report
• Additional safety instructions for devices with approvals (e.g. ATEX, IECEx, NEPSI, etc.)
• Optional: factory calibration form, test certificates
The Operating Instructions are available on the Internet at: www.endress.com →
Download
4.2 Product identification
The following options are available for the identification of the measuring device:
• Nameplate specifications
• Order code with breakdown of the device features on the delivery note
• Enter the serial numbers from the nameplates in W@M Device Viewer
(www.endress.com/deviceviewer): All the information about the measuring device is
displayed.
4.2.1 Manufacturer address
Endress+Hauser SE+Co. KG
Hauptstraße 1
79689 Maulburg, Germany
Place of manufacture: See nameplate.
To Next Page
Loading...
Need help?
General
