Deltabar PMD75B HART Incoming acceptance and product identification
Endress+Hauser 13
4.2.2 Nameplates
Different nameplates are used depending on the device version.
3
1 2
Date:
Order code:
Ser. no.:
Ser. no.:
Ext. ord. cd.:
MWP:
Cal./Adj.:
FW:
Dev.Rev.:
Mat.:
P:
HW:
Fill Fluid:
4 4
5
5
Ord.cd.:
Ext.ord.cd.:
MWP:
Cal./Adj.:
FW:
HW:
Date:
P:
Fill Fluid:
Mat.:
3
1
2
4
5
5
A0038163
1 Manufacturer name and device name
2 Address of the certificate holder and country of manufacture
3 Order code and serial number
4 Technical data
5 Approval-specific information
4.3 Storage and transport
4.3.1 Storage conditions
• Use the original packaging
• Store the measuring device in clean and dry conditions and protect from damage caused
by shocks
Storage temperature range
See Technical Information.
4.3.2 Transporting the product to the measuring point
L
WARNING
Incorrect transport!
Housing and diaphragm may become damaged, and there is a risk of injury!
‣
Transport the measuring device to the measuring point in its original packaging or by
the process connection.
To Next Page
Loading...
