Endress+Hauser Deltabar PMD75B HART - Accessories; Device-Specific Accessories; Plug Connectors; Weld-in Accessory

Accessories Deltabar PMD75B HART
68 Endress+Hauser
14 Accessories
14.1 Device-specific accessories
• Mounting bracket for housing
• Mounting bracket for manifolds
• Calibration adapter 5/16"-24 UNF, to screw into vent valves
• Protective cover
• Manifold
For technical data (e.g. materials, dimensions or order numbers), see the accessory
document SD01553P.
14.1.1 Plug connectors
• Plug connector M12 90 deg, IP67 5m cable, union nut, Cu Sn/Ni
• Plug connector M12, IP67 union nut, Cu Sn/Ni
• Plug connector M12, 90 deg IP67 union nut, Cu Sn/Ni
The IP protection classes are only maintained if the dummy cap is used or the cable is
connected.
14.1.2 Weld-in accessory
For details, refer to TI00426F/00/EN "Weld-in adapters, process adapters and
flanges".