Deltabar PMD75B HART Diagnostics and troubleshooting
Endress+Hauser 59
S
"Out of specification (S)" option
The device is being operated:
• Outside its technical specifications (e.g. during warm-up or cleaning process)
• Outside the parameter configuration undertaken by the user (e.g. level outside of
configured span)
M
"Maintenance required (M)" option
Maintenance required. The measured value is still valid.
Diagnostic event and event text
The fault can be identified by means of the diagnostic event. The event text helps you by
providing information on the fault. In addition, the corresponding symbol is displayed
before the diagnostic event.
X X X X X X XX X
S801
2
5
31
4
A0038013
1 Status symbol
2 Diagnostic event
3 Status signal
4 Event number
5 Event text
If two or more diagnostic events occur simultaneously, only the message with the highest
priority is shown.
"Actual diagnostics" parameter
Plus key
Opens the message about the remedial measures.
Enter key
Back to operating menu.
To Next Page
Loading...
