Endress+Hauser FMR 231 - Mechanical construction

9.3 Product structure FMR 231E
10 Certificate
Type Explosion Protection Housin g
A Standard none F12
1 PTB ATEX II 1/2 G EEx ia IIC T3...T6 F12
2 PTB ATEX II 1/2 G EEx e m IIC T3...T6 T12
K TIIS Ex ia IIC T3 F12
Y Special certificate
20 Antenna
Type* Material O-Ring Nozzle Length
A 360 mm PPS antenna SS 1.4435/PPS Viton max. 100 mm
B 510 mm PPS antenna SS 1.4435/PPS Viton max. 250 mm
E 390 mm PTFE antenna PTFE-clad SS 1.4435 None max. 100 mm
F 540 mm PTFE antenna PTFE-clad SS 1.4435 None max. 250 mm
H 390 mm PTFE antistatic antenna PTFE-clad SS 1.4435 None max. 100 mm
J 540 mm PTFE antistatic antenna PTFE-clad SS 1.4435 None max. 250 mm
30 Process Connection
Threaded connection Material
GGJ 1 ½ BSPT (R 1 ½ DIN 2999) 1.4435
GNJ 1 ½ NPT 1.4435
GGS 1 ½ BSPT (R 1 ½ DIN 2999) PVDF
GNS 1 ½ NPT PVDF
Flange
Dia/Pressure Standard Material
BFJ DN50 PN16 DIN 2526 Form B (flat) 1.4435
BMJ DN80 PN16 DIN 2526 Form B (flat) 1.4435
BNJ DN80 PN40 DIN 2526 Form B (flat) 1.4435
BQJ DN100 PN16 DIN 2526 Form B (flat) 1.4435
BWG DN150 PN16 DIN 2526 Form B (flat) 1.4435
CFJ DN50 PN16 DIN 2526 Form C (raised face) 1.4435
CMJ DN80 PN16 DIN 2526 Form C (raised face) 1.4435
CNJ DN80 PN40 DIN 2526 Form C (raised face) 1.4435
CQJ DN100 PN16 DIN 2526 Form C (raised face) 1.4435
CWJ DN150 PN16 DIN 2526 Form C (raised face) 1.4435
CFK DN50 PN16 DIN 2526 Form C (raised face) 1.4435/PTFE disc
CMK DN80 PN16 DIN 2526 Form C (raised face) 1.4435/PTFE disc
CQK DN100 PN16 DIN 2526 Form C (raised face) 1.4435/PTFE disc
CWK DN150 PN16 DIN 2526 Form C (raised face) 1.4435/PTFE disc
AEJ 2"/150lbs ANSI B16.5 raised face 1.4435
ALJ 3"/150lbs ANSI B16.5 raised face 1.4435
AMJ 3"/300lbs ANSI B16.5 raised face 1.4435
APJ 4"/150lbs ANSI B16.5 raised face 1.4435
AQJ 4"/300lbs ANSI B16.5 raised face 1.4435
AVJ 6"/150lbs ANSI B16.5 raised face 1.4435
AEK 2"/150lbs ANSI B16.5 raised face 1.4435/PTFE disc
ALK 3"/150lbs ANSI B16.5 raised face 1.4435/PTFE disc
APK 4"/150lbs ANSI B16.5 raised face 1.4435/PTFE disc
AVP 6"/150lbs ANSI B16.5 raised face 1.4435/PTFE disc
KEJ 10 K 50A JIS B2210 raised face 1.4435
KLJ 10 K 80A JIS B2210 raised face 1.4435
KPJ 10 K 100A JIS B2210 raised face 1.4435
KVJ 10 K 150A JIS B2210 raised face 1.4435
KEK 10 K 50A JIS B2210 raised face 1.4435/PTFE disc
KLK 10 K 80A JIS B2210 raised face 1.4435/PTFE disc
KPK 10 K 100A JIS B2210 raised face 1.4435/PTFE disc
KVK 10 K 150A JIS B2210 raised face 1.4435/PTFE disc
Sanitary coupling
HFJ DN50 aseptic DIN 11864-1 1.4435
MFJ DN50 dairy DIN 11851 1.4435
TEJ 2" Tri-clamp ISO 2852 1.4435
TLJ 3" Tri-clamp ISO 2852 1.4435
YY9 Special process connection
40 Output/Communication
1 4...20 mA HART with display module VU 330
2 4...20 mA HART
5Other
50 Housing
A Aluminium housing Type F12, coated, IP 65
C Aluminium housing Type T12, coated, IP 65 with separate connection compartment
YOther
60 Cable Entry
1 with Pg13.5 gland
2 M20 x 1.5 entry
3 ½ BSP (G ½) entry
4½NPT
9 Special cable entry
70 Additional Equipment
ANone
C with gastight feedthrough
Y Additional equipment
Product structure
FMR231E-
Chapter 9 Technical Data Micropilot FMR 231
54 Endress+Hauser