Endress+Hauser FMR 231 - User interface

9.4 Product structure FMR 231A
10 Certificate
Type Explosion Protection Housing Operating frequency
A Standard none F12 5.8 GHz
R Standard none F12 6.3 GHz (FCC approval)
S FM IS Cl. I, Div. 1, Group A–D F12 6.3 GHz (FCC approval)
T FM XP Cl. I, Div. 1, Group A–D T12 6.3 GHz (FCC approval)
U CSA IS Cl. I, Div. 1, Group A–D F12 5.8 GHz
V CSA XP Cl. I, Div. 1, Group A–D T12 5.8 GHz
W FM XP Cl. I, Div. 1, Group A–D T12 5.8 GHz
Y Andere Zertifikate
20 Antenna
Type* Material O-Ring Nozzle Length
A 14" PPS antenna SS 1.4435/PPS Viton 4"
B 20" PPS antenna SS 1.4435/PPS Viton 10"
E 15" PTFE antenna PTFE-clad SS 1.4435 None 4"
F 21" PTFE antenna PTFE-clad SS 1.4435 None 10"
H 390 mm PTFE antistatic antenna PTFE-clad SS 1.4435 None 4"
J 540 mm PTFE antistatic antenna PTFE-clad SS 1.4435 None 10"
30 Process Connection
Threaded connection Material
GNJ 1 ½ NPT 1.4435
GNS 1 ½ NPT PVDF
Flange
Dia/Pressure Standard Material
AEJ 2"/150lbs ANSI B16.5 raised face 1.4435
ALJ 3"/150lbs ANSI B16.5 raised face 1.4435
AMJ 3"/300lbs ANSI B16.5 raised face 1.4435
APJ 4"/150lbs ANSI B16.5 raised face 1.4435
AQJ 4"/300lbs ANSI B16.5 raised face 1.4435
AVJ 6"/150lbs ANSI B16.5 raised face 1.4435
AEK 2"/150lbs ANSI B16.5 raised face 1.4435/PTFE disc
ALK 3"/150lbs ANSI B16.5 raised face 1.4435/PTFE disc
APK 4"/150lbs ANSI B16.5 raised face 1.4435/PTFE disc
AVP 6"/150lbs ANSI B16.5 raised face 1.4435/PTFE disc
Sanitary coupling
HFJ DN50 aseptic DIN 11864-1 1.4435
MFJ DN50 dairy DIN 11851 1.4435
TEJ 2" Tri-clamp ISO 2852 1.4435
TLJ 3" Tri-clamp ISO 2852 1.4435
YY9 Other
40 Output/Communication
1 4...20 mA HART with display module VU 330
2 4...20 mA HART
5Other
50 Housing
A Aluminium housing Type F12, coated, NEMA 4X
C Aluminium housing Type T12, coated, NEMA 4X
with separate connection compartment
YOther
60 Cable Conduit
4½NPT
9 othere
70 Additional Equipment
Anone
Y Additional equipment
Product structure
FMR231A-
Micropilot FMR 231 Chapter 9 Technical Data
Endress+Hauser 55