6 Calibration with Display/Remote Operation
The chapter describes the basic calibration and other functions that can be set via the
operating matrix. The matrix can be accessed via:
•
Operating and display module VU 330
•
HART handheld DXR 275
•
Operating program Commuwin II.
The matrix operation using the operating and display module VU 330 is described. At
the start of every procedure, however, the HART handheld menu is shown, e.g.
➤ Simulation.
The chapter is structured as follows:
Start calibration
tank or
pipe
Chapter 6.1
Basic calibration
and false echo
suppression
Chapter 6.2
Basic calibration
and false echo
suppression
Chapter 6.3
Linearisation
Chapter 6.4
Analogue output
Chapter 6.5
Safety functions
Chapter 6.6
Lock/unlock
tank
stilling well
BA171Y68
Micropilot FMR 231 Chapter 6 Calibration with Display/Remote Operation
Endress+Hauser 23