Endress+Hauser Hart Proline Promag P 500 - Turning the Transmitter Housing: Proline 500

Installation Proline Promag P 500 HART
36 Endress+Hauser
Post mounting
L
WARNING
Order code for "Transmitter housing", option L "Cast, stainless": cast transmitters are
very heavy.
They are unstable if they are not mounted on a secure, fixed post.
‣
Only mount the transmitter on a secure, fixed post on a stable surface.
1
4 x
SW 13
! … (! 0.79 to 2.75)20 70
A0029057
 15 Engineering unit mm (in)
6.2.6 Turning the transmitter housing: Proline 500
To provide easier access to the connection compartment or display module, the transmitter
housing can be turned.
N
i
c
h
t
u
n
t
e
r
a
r
e
ö
f
f
n
e
n
+
E
ESC
–
1.
2.
N
i
c
h
t
u
n
t
e
r
a
r
e
ö
f
f
n
e
n
+
E
ESC
–
3.
3 mm 4 mm
4.
A0029993
1. Depending on the device version: Loosen the securing clamp of the connection
compartment cover.
2. Unscrew the connection compartment cover.
3. Release the fixing screw.
4. Turn the housing to the desired position.
5. Firmly tighten the securing screw.
6. Screw on the connection compartment cover