Endress+Hauser Hart Proline Promag P 500 - Other Settings

System integration Proline Promag P 500 HART
92 Endress+Hauser
9.3 Other settings
Burst mode functionality in accordance with HART 7 Specification:
Navigation
"Expert" menu → Communication → HART output → Burst configuration → Burst
configuration 1 to n
‣
Burst configuration
‣
Burst configuration 1 to n
Burst mode 1 to n
→  92
Burst command 1 to n
→  92
Burst variable 0
→  93
Burst variable 1
→  93
Burst variable 2
→  93
Burst variable 3
→  93
Burst variable 4
→  93
Burst variable 5
→  93
Burst variable 6
→  93
Burst variable 7
→  93
Burst trigger mode
→  93
Burst trigger level
→  93
Min. update period
→  93
Max. update period
→  93
Parameter overview with brief description
Parameter Description Selection / User entry Factory setting
Burst mode 1 to n Activate the HART burst mode for burst
message X.
• Off
• On
Off
Burst command 1 to n Select the HART command that is sent to the
HART master.
• Command 1
• Command 2
• Command 3
• Command 9
• Command 33
• Command 48
Command 2