Endress+Hauser Liquiline CM44P - 3 Device Description; Housing Closed (Field Device); Housing Open (Field Device); Weather Protection Cover (Optional)

Device description Liquiline CM44P
10 Endress+Hauser
3 Device description
3.1 Housing closed (field device)
1 2
3
4
5
6
A0025813
 1 Mounted on a post
1 Display
2 Weather protection cover (optional)
3 Navigator
4 Sensor cable or current output cable
5 Power supply cable
6 Soft keys, assignment depends on menu
3.2 Housing open (field device)
2
3
4 5
6
789
10
11
1
A0039719
 2 Example of a four-channel device with an open display cover (without wiring)
1 Display cable 7 Threaded bolt for protective ground connection
2 Basic module 8 Extension power unit with internal cable
3 Extension modules (optional) 9 M12 connectors for sensor connection
(optional)
4 Shock protection, dummy cover and end cover 10 Distributor terminals for user-defined use
1)
5 Extension backplane 11 Storage slot for SD card
6 Cable mounting rail
1) Example: you want to loop the signal from the alarm relay to a siren and a lamp. The terminals on the
alarm relay only accommodate one cable. Route the signal from the alarm relay to a terminal on the
distributor block. The block's terminals are all interconnected. You therefore have 3 additional terminals on
this block from where you can carry the signal forward to the consumer (siren, lamp etc.). The signal can
be multiplied in this way.