EasyManua.ls Logo

Endress+Hauser Liquiline CM44P - 12.14 Firmware History

Endress+Hauser Liquiline CM44P
204 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Diagnostics and troubleshooting Liquiline CM44P
168 Endress+Hauser
12.14 Firmware history
Date Version Changes to firmware Documentation
12/2019 01.07.00 Expansion
Support for new BASE2 module
PROFINET
New sensor Memosens Wave CAS80E
Time switch for binary process values depending on time-
based conditions
Improvement
Maximum character length for formula mathematical
function has been extended to 255 characters
Heartbeat device status also via fieldbus
Heartbeat Verification: Status "not activated" redefined
Single-point calibration for pH sensors adapted to process
and logbook behavior of CM42
Format of delta time extended to seconds
BA01570C/07/EN/07.19
BA00486C/07/EN/02.13
BA01245C/07/EN/08.20
01/2019 01.06.08 Improvement
Heartbeat verification no longer affects outputs
Graphic display of Heartbeat status also in integrated web
server
Limit values for electrolyte depletion for amperometric
oxygen sensors
Limit values for CIP cycles for 4-pin conductivity sensors
BA01570C/07/EN/05.19
BA00486C/07/EN/02.13
BA01245C/07/EN/06.19
05/2018 01.06.06 Improvement
New soft keys ALL and NONE in multiple choice editors
Manual factor for CAS51D nitrate
Calibration timer and validity revised for pH, conductivity,
oxygen and disinfection
Clear distinction between offset and 1-point calibration
for pH
Heartbeat verification report can now also be downloaded
via the web server
Better description of diagnostics code 013
BA01570C/07/EN/04.18
BA00486C/07/EN/02.13
BA01245C/07/EN/05.17
06/2017 01.06.04 Expansion
Heartbeat Monitoring and Verification
New mathematical function Formula
New sensors: CUS50D and chlorine dioxide
Calibration via Ethernet/IP
PDF generator for Heartbeat
Sample calibration CAS51D
OUSAF46 with Easycal
Improvement
Changes to conductivity concentration tables
Renaming of parameter chlorine → Disinfection
Last active measuring screen restored after reboot
Cap and electrolyte replacements are logged in the
calibration logbook (oxygen, disinfection)
Manual factor for nitrate
BA01570C/07/EN/03.17
BA00486C/07/EN/02.13
BA01245C/07/EN/05.17

Table of Contents

Other manuals for Endress+Hauser Liquiline CM44P

Related product manuals