EasyManua.ls Logo

Endress+Hauser Liquiline CM44P - Page 169

Endress+Hauser Liquiline CM44P
204 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Liquiline CM44P Diagnostics and troubleshooting
Endress+Hauser 169
Date Version Changes to firmware Documentation
12/2016 01.06.03 Expansion
EasyCal filter recertification date visible in the DIAG/
Sensor information/Operating time menu
Sensor calibration via Modbus or Ethernet/IP:
conductivity, oxygen, chlorine and turbidity
Four-factor adjustment, SAC
Flash meter, nitrate and SAC
New sludge model CUS51D
Improvement
Local display can be locked via Modbus or Ethernet/IP
The output status can also be recorded in the data
logbook
Name of Endress+Hauser pH buffer 9.18 changed to 9.22
CUS51D factor can be read out via fieldbus
BA01570C/07/EN/02.16
BA00486C/07/EN/02.13
BA01245C/07/EN/04.16
03/2016 01.06.00 Original firmware
Expansion
Heartbeat verification
User-configurable diagnostic modules
Four-factor adjustment, SAC
Offset calibration CUS71D
New mathematical function, cation exchanger
Configurable byte order for Modbus
Improvement
Sensor calibration validity check (adaptation to batch
processes)
pH-Offset can be saved in either the sensor or the
transmitter (previously only possible in the transmitter)
CUS71D screens (gain display, trend information)
Modified menu texts
BA01570C/07/EN/01.16
BA00486C/07/EN/02.13
BA01245C/07/EN/03.16
LZ4 Library
Copyright (c) 2011-2016, Yann Collet
All rights reserved.
Redistribution and use in source and binary forms, with or without modification, are
permitted provided that the following conditions are met:
* Redistributions of source code must retain the above copyright notice, this list of
conditions and the following disclaimer.
* Redistributions in binary form must reproduce the above copyright notice, this list of
conditions and the following disclaimer in the documentation and/or other materials
provided with the distribution.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS
IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR
CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

Table of Contents

Other manuals for Endress+Hauser Liquiline CM44P

Related product manuals