Endress+Hauser Liquiline CM44P - Additional Functionality

Accessories Liquiline CM44P
182 Endress+Hauser
15.3 Additional functionality
15.3.1 Hardware extension modules
Kit, extension module AOR
• 2 x relay, 2 x 0/4 to 20 mA analog output
• Order No. 71111053
Kit, extension module 2R
• 2 x relay
• Order No. 71125375
Kit, extension module 4R
• 4 x relay
• Order No. 71125376
Kit, extension module 2AO
• 2 x 0/4 to 20 mA analog output
• Order No. 71135632
Kit, extension module 4AO
• 4 x analog output 0/4 to 20 mA
• Order No. 71135633
Kit, extension module 2DS
• 2 x digital sensor, Memosens
• Order No. 71135631
Kit, extension module 2AI
• 2 x 0/4 to 20 mA analog input
• Order No. 71135639
Kit, extension module DIO
• 2 x digital input
• 2 x digital output
• Auxiliary voltage supply for digital output
• Order No. 71135638
Kit, extension module 485
• Can be extended to PROFIBUS DP or Modbus RS485. This requires an additional
activation code which can be ordered separately.
• Order No. 71135634
Upgrade kit, extension module 485 with PROFIBUS DP
• Extension module 485
• PROFIBUS DP (+ Ethernet configuration)
• Order No. 71140888
Upgrade kit, extension module 485 with Modbus RS485
• Extension module 485
• Modbus RS485 (+ Ethernet configuration)
• Order No. 71140889
15.3.2 Firmware and activation codes
SD card with Liquiline firmware
• Industrial Flash Drive, 1 GB
• Order No. 71127100
You must quote the serial number of the device when ordering the activation code.
Activation code for digital HART communication
Order No. 71128428