Endress+Hauser Liquiline CM44P - Place the Device on the Mounting Plate; Slide the Device Downwards in the Guide on the Mounting Rail until It Clicks into Place

Installation Liquiline CM44P
24 Endress+Hauser
5.2.3 Wall mounting
≥ 340 (13.4)
≥
150 (5.91)
A0012686
 20 Installation clearance in mm (in)
1
3
4
2
A0027798
 21 Wall mounting
1 Wall
2
4 drill holes
1)
3 Mounting plate
4 Screws Ø 6 mm (not part of scope of supply)
1)
The size of the drill holes depends on the wall plugs used. The wall plugs and screws must be provided by the
customer.
A0027799
 22 Wall mounting
A0027797
 23 Attach the device and click it into place
1. Place the device on the mounting plate.
2. Slide the device downwards in the guide on the mounting rail until it clicks into place.
5.2.4 Disassembly (for conversion, cleaning etc.)
NOTICE
The device can be damaged if dropped
‣
When pushing the housing out of the holder, secure the housing to prevent it from
falling. If possible, ask a second person to help you.