Endress+Hauser Liquiline CM44P - Post Mounting Plate (Post Mounting Kit); Spring Washers and Nuts (Post Mounting Kit); Pipe Clamps (Post Mounting Kit)

Installation Liquiline CM44P
22 Endress+Hauser
1
2
3
4
56
7
8
A0033044
 14 Post mounting
1 Weather protection cover (optional) 5 Spring washers and nuts (post mounting kit)
2 Post mounting plate (post mounting kit) 6 Pipe or railing (circular/square)
3 Spring washers and nuts (post mounting kit) 7 Mounting plate
4 Pipe clamps (post mounting kit) 8 Threaded rods (post mounting kit)
A0033045
 15 Post mounting
A0025885
 16 Attach the device and click it into place
1. Place the device on the mounting plate.
2. Slide the device downwards in the guide on the mounting rail until it clicks into place.