Endress+Hauser Liquiline CM44P - Rail Mounting

Liquiline CM44P Installation
Endress+Hauser 23
5.2.2 Rail mounting
1 2
3
4
56
7
8
9
A0012668
 17 Rail mounting
1 Weather protection cover (optional) 6 Pipe or railing (circular/square)
2 Post mounting plate (post mounting kit) 7 Mounting plate
3 Spring washers and nuts (post mounting kit) 8 Threaded rods (post mounting kit)
4 Pipe clamps (post mounting kit) 9 Screws (post mounting kit)
5 Spring washers and nuts (post mounting kit)
A0025886
 18 Rail mounting
A0027803
 19 Attach the device and click it into place
1. Place the device on the mounting plate.
2. Slide the device downwards in the guide on the mounting rail until it clicks into place.