Accessories Liquiline CM44P
176 Endress+Hauser
15 Accessories
The following are the most important accessories available at the time this documentation
was issued.
‣
For accessories not listed here, please contact your Service or Sales Center.
15.1 Measuring cable
CUK80 cable set
• Pre-terminated and labeled cables for connecting analog photometer sensors
• Product Configurator on the product page: www.endress.com/cuk80
Memosens data cable CYK10
• For digital sensors with Memosens technology
• Product Configurator on the product page: www.endress.com/cyk10
Technical Information TI00118C
Memosens data cable CYK11
• Extension cable for digital sensors with Memosens protocol
• Product Configurator on the product page: www.endress.com/cyk11
Technical Information TI00118C
15.2 Sensors
15.2.1 Photometer sensors
OUSAF11
• Optical sensor for VIS/NIR absorption
• Stainless steel housing and sensor head made from dirt-repellent FEP
• Product Configurator on the product page: www.endress.com/ousaf11
Technical Information TI00474C
OUSAF12
• Optical sensor for the measurement of absorbance
• Variety of materials and process connections available
• Product Configurator on the product page: www.endress.com/ousaf12
Technical Information TI00497C
OUSAF22
• Optical sensor for measuring color concentrations
• Variety of materials and process connections available
• Product Configurator on the product page: www.endress.com/ousaf22
Technical Information TI00472C
OUSAF44
• Optical sensor for measuring UV absorption
• Variety of materials and process connections available
• Hygienic design
• Product Configurator on the product page: www.endress.com/ousaf44
Technical Information TI00416C
To Next Page
Loading...
