Liquiline CM44P Repair
Endress+Hauser 175
Item Kit Order no.
No graphic Kit CM44x: field housing display cable
• Display cable
• Instructions for spare parts kit CM44x
71101762
No graphic Kit CM44x: dummy plug for cable bushing
6 pieces
71104942
No graphic Kit CM44x: set of hinges
10 pieces
71107454
No graphic CDI plug-in connector with counter nut M20x1.5 51517507
No graphic Nameplate replacement
• Reprint of original or
• new print for retrofit or upgrade
XPC0009
14.2 Return
The product must be returned if repairs or a factory calibration are required, or if the
wrong product was ordered or delivered. As an ISO-certified company and also due to legal
regulations, Endress+Hauser is obliged to follow certain procedures when handling any
returned products that have been in contact with medium.
To ensure the swift, safe and professional return of the device:
‣
Refer to the website www.endress.com/support/return-material for information on the
procedure and conditions for returning devices.
14.3 Disposal
The device contains electronic components. The product must be disposed of as electronic
waste.
‣
Observe the local regulations.
Batteries must always be disposed of in accordance with local regulations on battery
disposal.
To Next Page
Loading...
