Endress+Hauser Liquiline CM44P - Page 166

Diagnostics and troubleshooting Liquiline CM44P
166 Endress+Hauser
DIAG/System information
Function Options Info
Ethernet
Only with the Ethernet, EtherNet/IP,
Modbus TCP, Modbus RS485 or PROFIBUS
DP or PROFINET option
Read only
• Enable
• Webserver
• Link settings
• DHCP
• IP-Address
• Netmask
• Gateway
• Service switch
• MAC-Address
• EtherNetIP Port 44818
• Modbus TCP Port 502
• Webserver TCP Port 80
Ethernet‐specific information
Display depends on the fieldbus
protocol used.
PROFINET
Only with the PROFINET option
Name of Station Read only
SD card Read only
• Total
• Free memory
System modules
Backplane Read only
• Description
• Serial number
• Order code
• Hardware version
• Software version
This information is provided for
every electronics module available.
Specify the serial numbers and order
codes when servicing, for example.
Base
Display module
Extension module 1 ... 8
Sensors Read only
• Description
• Serial number
• Order code
• Hardware version
• Software version
This information is provided for
every sensor available. Specify the
serial numbers and order codes
when servicing, for example.
Save system information
Save to SD card File name assigned
automatically (includes a
time stamp)
The information is saved on the SD
card in a "sysinfo" subfolder.
The csv file can be read and edited
in MS Excel, for example. This file
can be used when servicing the
device.