Endress+Hauser Liquiline CM44P - Page 73

Liquiline CM44P Operation
Endress+Hauser 73
Menu/Setup/General settings/Extended setup/Webserver
Function Options Info
User administration
List of users already
created
View/edit You can change user names or passwords or
delete users. A user is already created at the
factory: "admin" with password "admin".
New user:
Name Free text Create new user
1. INSERT .
2. Assign any name to the new user.
3. Select a password for the user.
4. Confirm password.
 You can now change the password at
any time.
Enter new user password Free text
Confirm new user
password
Free text
Change user password Free text
PROFINET
Menu/Setup/General settings/Extended setup/PROFINET
Function Options Info
Name of Station Read only
Factory setting
Empty character string
Symbolic name for unique identification of the
field device in a PROFINET system. The
parameter can only be written via the DCP
protocol.
Ethernet/IP or Ethernet (depending on the protocol)
If PROFINET is used, the settings in this menu are read only settings. The network
settings are made via the PROFINET-DCP protocol.
For detailed information on "PROFINET communication", see the product pages on the
internet (→ SD02490C).
‣
All the functions and configuration options listed in the following table do not apply for
PROFINET.