Endress+Hauser Micropilot FMR56 - Page 102

The "Expert" menu Micropilot FMR50/FMR51/FMR52/FMR53/FMR54/FMR56/FMR57 FOUNDATION Fieldbus
102 Endress+Hauser
Parameters of the "Mapping" submenu
On the local display
In the first part of the Mapping submenu two parameters are displayed on the local
display at the same time. The upper parameter can be edited. The lower parameter is
displayed for reference purposes only.
Parameter Meaning Description
Confirm distance Confirm whether the displayed distance
matches the actual distance.
(→  104)
Distance Displays the currently measured distance (→  104)
Mapping end point Defines the distance up to which the map is
recorded.
(→  105)
Present mapping Indicates the distance up to which a mapping
has already been recorded.
(→  105)
Record map Starts the recording of the map (→  105)
Mapping end point Indicates the distance up to which the map is
recorded.
(→  105)
Distance Displays the currently measured distance (→  104)
Present mapping Indicates the distance up to which a mapping
has already been recorded.
(→  105)
End of mapping Defines the behavior or the map in the Map
gap.
(→  106)
End mapping amplitude Amplitude of the map in the Map gap (→  106)