Operating Instructions OXY5500 Gas Analyzer
22 Endress+Hauser
5.4 Measurement settings (Meas. settings) menu
General measurement setting changes are performed in the MEASUREMENT SETTINGS menu. If the measurement
settings are not changed, the settings from the last measurement will be applied.
The Measurement Settings (Meas. Settings) window is selected from the MAIN MENU screen. Refer to Figure 16.
Figure 16. Main menu screen - Measurement settings selected
1. Select Meas. Settings from the MAIN MENU screen. A message window displays requiring confirmation to abort
the currently running measurement. Refer to Figure 17.
Figure 17. Message window - Stop measurements during configuration
2. Click Yes to stop the measurement in order to display the MEASUREMENT SETTINGS screen. Refer to Figure 18.
Figure 18. Measurement settings screen
3. Use the Arrow buttons to navigate between screens.
To Next Page
Loading...
