OXY5500 Gas Analyzer Operating Instructions
Endress+Hauser 85
8.14 Storage
The packaged analyzer should be stored in a sheltered environment that is temperature controlled between -20 °C (4
°F) and 70 °C (158 °F) and should not be exposed to direct sun, rain, snow, condensing humidity, or corrosive
environments.
8.15 Disclaimers
Endress+Hauser accepts no responsibility for consequential damages arising from the use of this equipment. Liability
is limited to replacement and/or repair of defective components.
This manual contains information protected by copyright. No part of this guide may be photocopied or reproduced in
any form without prior written consent from Endress+Hauser.
8.16 Warranty
For a period of 18 months from date of shipment or 12 months in operation, whichever comes first, Endress+Hauser
warrants that all products sold by it shall be free from defects in material and workmanship under normal use and
service when correctly installed and maintained. Endress+Hauser’s sole liability and Customer’s sole and exclusive
remedy for a breach of warranty is limited to Endress+Hauser’s repair or replacement (at Endress+Hauser’s sole
option) of the product or part thereof which is returned at Customer’s expense to Endress+Hauser’s plant. This
warranty shall apply only if Customer notifies Endress+Hauser in writing of the defective product promptly after the
discovery of the defect and within the warranty period. Products may only be returned by Customer when
accompanied by a return authorization reference number (SRO) issued by Endress+Hauser. Freight expenses for
products returned by Customer will be prepaid by Customer. Endress+Hauser shall pay for shipment back to
Customer for products repaired under warranty. For products returned for repair that are not covered under
warranty, Endress+Hauser’s standard repair charges shall be applicable in addition to all shipping expenses.