Operating Instructions OXY5500 Gas Analyzer
24 Endress+Hauser
Figure 21. Sensor options
• Up and Down Arrows: Navigate up and down in the sensor list.
• OK: Select the sensor options. The display will switch to respective screens.
• Menu Arrow: Return to the MAIN MENU screen.
Refer to Change parameters → and Calibrating the analyzer on → for more information about these functions.
5.7 Digitals menu
From the MAIN MENU, select Digitals to change the digital connection setting of the OXY5500. Refer to Figure 22.
Figure 22. Main menu screen - Digitals selected
Before displaying the DIGITALS screen, a message window displays requesting confirmation to abort the currently
running operation. Refer to Figure 23.
Figure 23. Message window - Stop measurements during configuration
Select Yes and stop the measurement to proceed with the Digitals settings.
The DIGITALS menu is divided into three screens: RS-232, RS-485, and TCP/IP settings. Refer to Digitals Menu
Options → for more information for setting these options.
Use the Up and Down Arrow buttons to navigate between input fields.
To Next Page
Loading...
