EasyManua.ls Logo

Endress+Hauser OXY5500 - Spare Parts

Endress+Hauser OXY5500
86 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
OXY5500 Gas Analyzer Operating Instructions
Endress+Hauser 71
7.2 Spare parts
Below is a list of spare parts for the OXY5500 Optical Oxygen Analyzer with recommended quantities for 2 years of
operation. Not all parts listed are included on every analyzer. When ordering, please specify the system serial
number to ensure that the correct parts are identified.
Part Number Description 2 YR QTY
Electronics Assembly Components
70157019 Window, Enclosure
70157020 Window Gasket, Enclosure
70175074 OXY5500 Display
70175071 Replacement Kit, Transmitter, OXY5500
EX4000000004 Power Supply, Module, AC100-240V to DC24V 1.3A 1
70157025 Power Supply, DC/DC Conv., 15W, 24V, DIN 1
4300002034 Cartridge Fuse, 216 Series, 5 x 20mm, Fast Act 800 mA, 250V 1
70178487 Communication Board
Optical Fiber Probes and Installation Accessories
70163999 Optical Fiber Assembly, OP-9 Sensor Probe, 1000ppm, 0.7 m, SMA 1
70164000 Optical Fiber Assembly, OP-9 Sensor Probe, 1000ppm, 2.5 m, SMA 1
70164001 Optical Fiber Assembly, OP-9 Sensor Probe, 1000ppm, 5.0 m, SMA 1
70164002 Optical Fiber Assembly, OP-6 Sensor Probe, 5%, 0.7 m, SMA 1
70164003 Optical Fiber Assembly, OP-6 Sensor Probe, 5%, 2.5 m, SMA 1
70164004 Optical Fiber Assembly, OP-6 Sensor Probe, 5%, 5.0 m, SMA 1
70164005 Optical Fiber Assembly, OP-3 Sensor Probe, 20%, 0.7 m, SMA 1
70164006 Optical Fiber Assembly, OP-3 Sensor Probe, 20%, 2.5 m, SMA 1
70164007 Optical Fiber Assembly, OP-3 Sensor Probe, 20%, 5.0 m, SMA 1
70164008
OXY5500 Fiber Probe Conduit Kit (all lengths) (includes all parts associated with fiber probe
installation)
70157039 Front Ferrule, 4 mm, Teflon
70157040 Back Ferrule, 4 mm, Teflon
70157041 Tube Reducer, 4 mm TX 1/4 TSTUB, BT, SS
Temperature Probes and Installation Accessories
70157042 RTD Probe, 100 W, 1/8 x 2, SS ARM, 40 in. LG
70157043 RTD Probe, 100 W, 1/8 x 2, SS ARM, 10 in. LG
70157044 Tube Reducer, 1/8 TX 1/4 TA, SS, Bored
70164009
OXY5500 Temperature Sensor Kit (0.7 m) (includes temperature sensor and all parts
associated with installation)
70164010
OXY5500 RTD Probe Kit (2.5 m, 5.0 m) (includes temperature sensor and all parts associated
with installation)
Pressure Transmitter and Installation Accessories
70157047 Pressure Transmitter 1
70157048 Male Connector, 1/4 TFX, 1/4 MNPT, 316SS
70164011
OXY5500 Pressure Sensor Kit (includes pressure sensor and all parts associated with
installation)

Table of Contents

Other manuals for Endress+Hauser OXY5500

Related product manuals