OXY5500 Gas Analyzer Operating Instructions
Endress+Hauser 21
Figure 14. OXY5500 software menu map
5.3 Measurement menu
Selecting Measurement from the MAIN MENU screen displays the currently measured values and measurement
settings. Refer to Figure 15.
Figure 15. Main menu screen - Measurement selected
Views can be selected for simple, detailed, or graphical presentations of the measurements. Use the buttons to switch
between screens. Refer to Measurement Menu Options → for more information on accessing screen views from
this menu selection.
If power to the analyzer is disabled, Time, and Date settings will be set to zero. Before starting a new
measurement, reset the Time and Date in Device settings screen → , so that the correct measurement time is
stored with the data.
To Next Page
Loading...
