OXY5500 Gas Analyzer Operating Instructions
Endress+Hauser 33
Figure 36. Measurement browser - List of measurement files
• Use the Up and Down Arrow buttons to navigate up or down the list.
• Click OK to select the highlighted file. The new measurement data will be added to the existing file. The display
will switch back to the measurement settings automatically.
In Figure 36, the Monitor symbol in the Status bar shows that Logging is turned on and measurement data are
going to be stored.
• Click the Left Arrow to delete the highlighted measurement file from the list. A window will display with the
question, “Really delete this measurement?” Select Yes and the highlighted measurement field will be deleted.
The currently activated measurement file cannot be deleted. To delete, first select another measurement file,
then return to deleting the measurement file to be removed. The default measurement cannot be deleted.
Click the Right Arrow to create a new measurement file. A keyboard screen displays to enter the new measurement
file name. Refer to Figure 37.
Figure 37. Keyboard screen to enter measurement name
• Use the Arrow buttons to move across the keyboard and the OK button to select the respective letter or number.
The new measurement name will show in the highlighted box at the bottom of the screen.
To return to the measurement file list without creating a new file, click Menu.
• Finish typing the file name, click Done and OK. The new measurement file will display in the file list.
• To select a newly created measurement file for data storage, click OK a second time. The screen will switch back
to the measurement settings automatically.
• Click Menu to save the changes and return to the MAIN MENU screen.
To Next Page
Loading...
