Endress+Hauser Proline Promag 50 - Page 136

10 Technical data PROline Promag 50
136 Endress+Hauser
Promag H / DN 40...100 (remote version)
Fig. 73: Dimensions Promag H / DN 40...100 (remote version)
Dimensions wall-mounted housing
→ seePage122
DN PN DI L A B C K M
[mm] [inch] [bar] [mm] [mm] [mm] [mm] [mm] [mm] [mm]
40 1 1/2" 16 35.3 140 216 151.5 64.5 128 M 6x4
50 2" 16 48.1 140 241 164.0 77.0 153 M 8x4
65 2 1/2" 16 59.9 140 241 164.0 77.0 153 M 8x4
80 3" 16 72.6 200 290 188.5 101.5 203 M 12x4
100 4" 16 97.5 200 290 188.5 101.5 203 M 12x4
Fitting length depends on process connections
→ Page 145 ff.
L
125
75
A
C
B
70
K
DI
M
F06-xxHxxxxx-06-05-xx-xx-000