Endress+Hauser Proline Promag 50 - Page 135

PROline Promag 50 10 Technical data
Endress+Hauser 135
Promag H / DN 40...100 (compact version)
Fig. 71: Dimensions Promag H / DN 40...100 (compact version, aluminum field housing)
Fig. 72: Dimensions Promag H / DN 40...100 (compact version, stainless-steel field housing)
DN PN DI L A * B * C K M
[mm] [inch] [bar] [mm] [mm] [mm] [mm] [mm] [mm] [mm]
40 1 1/2" 16 35.3 140 319 (330) 255 (266) 64 128 M 6x4
50 2" 16 48.1 140 344 (355) 267 (278) 77 153 M 8x4
65 2 1/2" 16 59.9 140 344 (355) 267 (278) 77 153 M 8x4
80 3" 16 72.6 200 394 (405) 292 (303) 102 203 M 12x4
100 4" 16 97.5 200 394 (405) 292 (303) 102 203 M 12x4
Overall fitting length will depend on the process connections
→ Page 145 ff.
* () = Dimensions stainless steel field housing
F06-50Hxxxxx-06-00-xx-xx-000
220
K
DI
L
153
171
A
C
B
M
Esc
E
- +
F06-50Hxxxxx-06-00-xx-xx-003