Endress+Hauser Proline Promag 50 - Page 143

PROline Promag 50 10 Technical data
Endress+Hauser 143
Process connections orderable only as accessories (with O-ring seal, DN 2…25)
Coupling:
Threaded adapter SMS 1145
1.4404 / 316L
5*H**-5***********
Sensor Fits to SMS 1145 di G L H x B
DN [mm] Piping OD Diameter
[mm]
[mm] [mm] [mm] [mm]
25 (1" ANSI) 1" 25 22.5 Rd 40 x 1/6" 30.8 70 x 52
– Fitting length = (2 x L) + 86 mm
– If pigs are used for cleaning, it is essential to take the inside diameters of measuring tube (Page 133)
and process connection (di) into account.
G
di
L
H x B
F06-xxHxxxxx-06-09-07-xx-026
External pipe thread
1.4404 / 316L
DKH**-GD**
Sensor Fits to di G L S H x B
DN [mm] NP internal thread [mm] [inch] [mm] [mm] [mm]
2…8 NPT 3/8" 10 3/8" 50 15.5 60 x 42
15 NPT 1/2" 16 1/2" 50 20.0 60 x 42
25 (1" ANSI) NPT 1" 25 1" 57 25.0 70 x 52
Fitting length = (2 x L) + 86 mm
G
di
L
H x B
S
F06-xxHxxxxx-06-09-07-xx-025
Internal pipe thread
1.4404 / 316L
DKH**-GC**
Sensor Fits to di G D L S H x B
DN [mm] NP external thread [mm] [inch] [mm] [mm] [mm] [mm]
2…8 NPT 3/8" 8.9 3/8" 22 45 13 60 x 42
15 NPT 1/2" 16.0 1/2" 27 45 14 60 x 42
25 (1" ANSI) NPT 1" 27.2 1" 40 49 17 70 x 52
Fitting length = (2 x L) + 86 mm
D
G
di
L
H x B
S
F06-xxHxxxxx-06-09-07-xx-027