Endress+Hauser Proline Promag W 500 - Page 7

Proline Promag W 500
Endress+Hauser 7
Sensor connection housing
Different versions of the connection housing are available.
Order code for "Sensor connection housing", option A, "Aluminum, coated":
Aluminum, AlSi10Mg, coated
Order code for "Sensor connection housing", option D, "Polycarbonate":
Polycarbonate
Sensor
Promag W • Nominal diameter range: DN 25 to 2000 (1 to 78")
• Materials:
– Sensor housing: aluminum, AlSi10Mg, coated; carbon steel with
protective varnish
– Sensor connection housing (standard): aluminum, AlSi10Mg, coated
Sensor connection housing (option): polycarbonate
– Measuring tubes
1)
:
DN 25 to 600 (1 to 24"): stainless steel, 1.4301/1.4306/304/304L
DN 700 to 2000 (28 to 78"): stainless steel, 1.4301/304
– Liner: hard rubber, polyurethane
– Electrodes: stainless steel, 1.4435 (316L); Alloy C22, 2.4602 (UNS
N06022); tantalum
– Process connections:
Stainless steel, 1.4404/1.4571/F316L
Carbon steel, A105/A181/A350LF2/A515(70)/FE410WB/
S235JRG2/S235J+N/S275JR/P235GH/P250GH/P265GH
– Seals: as per DIN EN 1514-1 Form IBC
– Ground disks: stainless steel, 1.4435 (316L); Alloy C22, 2.4602
(UNS N06022); tantalum
Fixed flange: DN 25 to 300 (1 to
12")
A0017040
Fixed flange: DN 350 to 2000 (14
to 78")
A0017041
1) For carbon steel flange material with Al/Zn protective coating (DN 25 to 300 (1 to 12")), protective varnish
(IP68) (DN 50 to 300 (2 to 12")) or protective varnish ≥ DN 350 (14")