Proline Promag W 500
92 Endress+Hauser
Cable entries and adapters Material
Cable gland M20 × 1.5 Plastic
• Adapter for cable entry with internal thread G ½"
• Adapter for cable entry with internal thread NPT ½"
Only available for certain device versions:
• Order code for "Transmitter housing":
Option A "Aluminum, coated"
• Order code for "Sensor connection housing":
Proline 500:
Option A "Aluminum coated"
Option D "Polycarbonate"
Nickel-plated brass
Adapter for device plug
Device plug for digital communication:
Only available for certain device versions → 28.
Stainless steel, 1.4404 (316L)
Device plugs Plug M12 × 1
• Socket: Stainless steel, 1.4404 (316L)
• Contact housing: Polyamide
• Contacts: Gold-plated brass
Device plug
Electrical connection Material
Plug M12x1 • Socket: Stainless steel, 1.4404 (316L)
• Contact housing: Polyamide
• Contacts: Gold-plated brass
Connecting cable
Connecting cable for sensor - transmitter
• Standard cable: PVC cable with copper shield
• Reinforced cable: PVC cable with copper shield and additional steel wire braided jacket
UV rays can impair the cable outer sheath. Protect the cable from exposure to sun as much as
possible.
Sensor housing
• DN 25 to 300 (1 to 12"):
– Aluminum, AlSi10Mg, coated
– Carbon steel with Al/Zn protective coating
• DN 25 to 300 (1 to 12"):
Carbon steel with protective varnish (IP68)
• DN 350 to 2000 (14 to 78"):
Carbon steel with protective varnish
Measuring tubes
• DN 25 to 600 (1 to 24")
1)
: stainless steel, 1.4301/1.4306/304/304L
• DN 700 to 2000 (28 to 78")
1)
: stainless steel, 1.4301/304
Liner
• DN 25 to 1200 (1 to 48"): polyurethane
• DN 50 to 2000 (2 to 78"): hard rubber
1) For carbon steel flange material with Al/Zn protective coating (DN 25 to 300 (1 to 12")), protective varnish (IP68) (DN 50 to 300 (2 to 12")) or
protective varnish ≥ DN 350 (14")
To Next Page
Loading...
