Endress+Hauser Proline Promass I 300 - Page 118

Commissioning Proline Promass I 300 PROFINET
118 Endress+Hauser
Parameter Prerequisite Description Selection / User
entry
Factory setting
• Index
inhomogeneous
medium
• Application
specific output 0
*
• Index suspended
bubbles
*
0% bargraph value 1 A local display is provided. Enter 0% value for bar graph
display.
Signed floating-point
number
Country-specific:
• 0 kg/h
• 0 lb/min
100% bargraph value 1 A local display is provided. Enter 100% value for bar
graph display.
Signed floating-point
number
Depends on country
and nominal
diameter
Value 2 display A local display is provided. Select the measured value that
is shown on the local display.
For the picklist, see
the Value 2 display
parameter
(→  118)
–
Value 3 display A local display is provided. Select the measured value that
is shown on the local display.
For the picklist, see
the Value 2 display
parameter
(→  118)
–
0% bargraph value 3 A selection was made in the
Value 3 display parameter.
Enter 0% value for bar graph
display.
Signed floating-point
number
Country-specific:
• 0 kg/h
• 0 lb/min
100% bargraph value 3 A selection was made in the
Value 3 display parameter.
Enter 100% value for bar
graph display.
Signed floating-point
number
–
Value 4 display A local display is provided. Select the measured value that
is shown on the local display.
For the picklist, see
the Value 2 display
parameter
(→  118)
–
* Visibility depends on order options or device settings