Endress+Hauser Proline Promass I 300 - Page 151

Proline Promass I 300 PROFINET Operation
Endress+Hauser 151
Parameter overview with brief description
Parameter Prerequisite Description Selection / User entry /
User interface
Assign channel 1 The Extended HistoROM application
package is available.
Assign process variable to logging
channel.
• Off
• Mass flow
• Volume flow
• Corrected volume flow
*
• Target mass flow
*
• Carrier mass flow
*
• Target volume flow
*
• Carrier volume flow
*
• Target corrected volume
flow
*
• Carrier corrected volume
flow
*
• Density
• Reference density
*
• Concentration
*
• Dynamic viscosity
*
• Kinematic viscosity
*
• Temp. compensated
dynamic viscosity
*
• Temp. compensated
kinematic viscosity
*
• Temperature
• Carrier pipe
temperature
*
• Electronic temperature
• Oscillation frequency 0
• Oscillation frequency 1
*
• Oscillation amplitude
*
• Oscillation amplitude 1
*
• Frequency fluctuation 0
*
• Frequency fluctuation 1
*
• Oscillation damping 0
*
• Oscillation damping 1
*
• Oscillation damping
fluctuation 0
*
• Oscillation damping
fluctuation 1
*
• Signal asymmetry
*
• Exciter current 0
*
• Exciter current 1
*
• HBSI
*
• Current output 1
*
• Current output 2
*
• Current output 3
*
• Current output 4
*
• Pressure
• Application specific
output 1
*
• Index inhomogeneous
medium
• Application specific
output 0
*
• Index suspended
bubbles
*
Assign channel 2 The Extended HistoROM application
package is available.

The software options currently
enabled are displayed in the
Software option overview
parameter.
Assign process variable to logging
channel.
Picklist, see Assign
channel 1 parameter
(→  151)