Endress+Hauser Proline Prosonic Flow 91 User Manual

Technical data Proline Prosonic Flow 91
66 Endress+Hauser
10.1.12 Certificates and approvals
Ex approval Information about currently available Ex versions (FM, CSA) can be supplied by your
Endress+Hauser Sales Center on request. All explosion protection data are given in a separate
documentation which is available upon request.
CE mark The measuring system is in conformity with the statutory requirements of the EC Directives.
Endress+Hauser confirms successful testing of the device by affixing to it the CE mark.
C-tick mark The measuring system meets the EMC requirements of the Australian Communication and Media
Authority (ACMA).
Other standards and
guidelines
• EN 60529:
Degrees of protection by housing (IP code).
• EN 61010-1
Protection Measures for Electrical Equipment for Measurement, Control, Regulation and
Laboratory Procedures.
• IEC/EN 61326
"Emission in accordance with requirements for Class A". Electromagnetic compatibility
(EMC requirements)
• ANSI/ISA-61010-1 (82.02.01)
Safety Standard for Electrical and Electronic Test, Measuring, Controlling and related Equipment
- General Requirements. Pollution degree 2.
• CAN/CSA-C22.2 No. 1010.1-92
Safety requirements for Electrical Equipment for Measurement and Control and Laboratory Use.
Pollution degree 2, Installation Category II
•NAMUR NE 21
Electromagnetic compatibility (EMC) of industrial process and laboratory control equipment.
•NAMUR NE 43
Standardization of the signal level for the breakdown information of digital transmitters with
analog output signal.
•NAMUR NE 53
Software of field devices and signal-processing devices with digital electronics.
10.1.13 Ordering information
Your Endress+Hauser service organization can provide detailed ordering information and
information on the order codes on request.
10.1.14 Accessories
Various accessories, which can be ordered separately from Endress+Hauser, are available for the
transmitter and the sensor → ä 46.
Your Endress+Hauser service organization can provide detailed information on the order codes in
question.
10.1.15 Documentation
• Flow Measurement (FA005D/06)
• Technical Information Prosonic Flow 91W (TI105D/06)
• Supplementary documentation on Ex-ratings: ATEX, FM, CSA

Endress+Hauser Proline Prosonic Flow 91 Specifications

General

Brand	Endress+Hauser
Model	Proline Prosonic Flow 91
Category	Measuring Instruments
Language	English