Endress+Hauser Proline Prosonic Flow 91 User Manual

Operation Proline Prosonic Flow 91
32 Endress+Hauser
5.3.2 Device description files for operating programs
The following section illustrates the suitable device description file for the operating program in
question and then indicates where this file can be obtained.
!
Note!
The Fieldcheck tester/simulator is used for testing flowmeters in the field. When used in
conjunction with the "FieldCare" software package, test results can be imported into a database,
printed and used for official certification. Contact your Endress+Hauser representative for more
information.
5.3.3 Device variables
Device variables:
The following device variables are available using the HART protocol:
Process variables:
At the factory, the process variables are assigned to the following device variables:
• Primary process variable (PV) → Volume flow
• Second process variable (SV) → Totalizer
Valid for device software: V 1.01.XX → Function DEVICE SOFTWARE
HART device data:
Manufacturer ID:
Device ID:
Device Revision:
DD Revision:
11
hex
(ENDRESS+HAUSER)
62
hex
(98
dec
)
1
1
→ Function MANUFACT ID
→ Function DEVICE ID
Software release: 02.2010
Operating program/device
description:
Sources for obtaining device descriptions/program updates:
Handheld terminal Field Xpert SFX100 Use update function of handheld terminal
FieldCare / DTM • www.endress.com → Download
• CD-ROM (Endress+Hauser order number 56004088)
• DVD (Endress+Hauser order number 70100690)
AMS www.endress.com → Download
SIMATIC PDM www.endress.com → Download
Tester/simulator: Sources for obtaining device descriptions:
Fieldcheck Update via FieldCare using the Flow Device FXA193/291 DTM in the
Fieldflash module
ID (decimal) Device variable
0 OFF (not assigned)
30 Volume flow
250 Totalizer 1

Endress+Hauser Proline Prosonic Flow 91 Specifications

General

Brand	Endress+Hauser
Model	Proline Prosonic Flow 91
Category	Measuring Instruments
Language	English