Endress+Hauser Proline Prosonic Flow 91 User Manual

Operation Proline Prosonic Flow 91
38 Endress+Hauser
5.3.5 Device status/diagnosis messages
You can read the extended device status, in this case, current diagnosis messages, via
Command "48". The command delivers bit-encoded information (see table below).
!
Note!
• For detailed information on the device status/diagnosis messages and how they are rectified
→ ä 50
• Bits and bytes not listed are not assigned.
Byte Bit Diagnosis code Brief description of the diagnosis message
0
0 C - 284 Software update
1 C - 481 Diagnosis active
2 C - 281 Initialization
3 C - 411 Upload/download
4 F - 001 Device fault
5 F - 282 Data storage
6 F - 283 Memory contents
7 F - 062 Sensor connection
1
0 F - 062 Sensor connection
1 F - 881 Sensor signal
2 C - 431 Calibration
3 C - 412 Writing backup
4 C - 413 Reading backup
5 C - 461 Signal output
6 C - 453 Hide value
7 C - 484 Simulation error
2
0 C - 485 Simulation value
1 C - 482 Simulation output
2 C - 482 Simulation output
3 C - 482 Simulation output
4 C - 482 Simulation output
5 S - 461 Signal output
6 S - 461 Signal output
7 S - 461 Signal output
3
0S - 437Configuration
1S - 437Configuration
2--
3--
4--
5--
6--
7--

Endress+Hauser Proline Prosonic Flow 91 Specifications

General

Brand	Endress+Hauser
Model	Proline Prosonic Flow 91
Category	Measuring Instruments
Language	English