16-Channel Digital Video Recorder
59
Highlight the Text Input Device box and press the
button. Select your Text Input Device from the list.
Highlighting the + and pressing the button allows you to add a new set of search parameter. Set up the desired
search parameter. Refer to the Appendix – Text-In Search Examples for further information on setting up search parameters.
The
column can be used to delete a set of search parameter or entire sets of search parameters.
Highlight Case Sensitive and press the
button. This will toggle between On and Off. When this feature is On,
the search will find only those text strings in which the case matches.
Highlight Load and press the button to load saved search option settings. Select the desired search option settings.
Highlight Save and press the button to save the current search option settings. A virtual keyboard appears that
you can use to enter the search option name.
Once you set your desired search conditions, highlight Search and press the
button to display the search results
in the Text-In Search screen. Selecting Cancel exits the screen without saving the changes.
Clip-Copy
Video clips can be copied on an external USB hard disk or flash drive. The copied video clips can be viewed on computers
running Microsoft Windows 98, ME, 2000, XP or Vista. Refer to the Appendix – USB Hard Disk Drive Preparation
for information on preparing the external drive for clip copy.
Selecting A–B Clip-Copy in the Search – Export menu or pressing the BACK UP button on the remote control during
playback will set the starting point of the video to be clip copied, and the
icon displays at the bottom-left corner of
the screen. Selecting A–B Clip-Copy in the Search – Export menu or pressing the
BACK UP button again will set the
ending point of the video to be clip copied by displaying the Clip-Copy screen.
Pressing and holding the BACK UP button on the remote control for more than three seconds while in the Search mode
or Live Monitoring mode initiates the One-Touch Clip Copy function. The last recorded image will be the ending point
of video to be clip copied, and the system will automatically begin to calculate the possible video data size that the
selected storage media can handle.
Select Clip-Copy in the Search – Export menu, press the BACK UP button on the remote control while in the Live
Monitoring mode, or press and hold the SEARCH button on the front panel for more than three seconds while in the
Search mode or Live Monitoring mode, and the Clip-Copy screen appears to allow clip copy setup.
Figure 70 — Clip-Copy screen.
You can search video from the first to last recorded images, or you can
set the start and stop times and dates.
Highlight the box beside From and press the
(Play/Pause) button
to toggle between On and Off. When set to Off, you can enter a specific
Date and Time. When set to On, the search will be from the first recorded
image.
Highlight the box beside To and press the
button to toggle between
On and Off. When set to Off, you can enter a specific Date and Time.
When set to On, the search will be from the last recorded image.
Highlight the box beside Channels and press the
button. You can
select the cameras that you would like to include in your video clip
.
Highlight the box beside Password and press the
button. A virtual keyboard appears allowing you to enter the
password for reviewing the video clips.
Highlight the box beside Dest. and press the
button. You can select the storage device on which you would like
to record the video clip.
CAUTION: The USB device for clip copy must be FAT 16 or FAT32 format.
To Next Page
Loading...
