7 OUTPUT OPTIONS
Optionally, model CA2150-E can incorporate one or several output options for control or communication:
Communication options
Serial RS232C
Serial RS485
Control options
Analog 4-20 mA
Analog 0-10 V
2 Relays SPDT 8 A
4 Relays SPST 5 A
4 NPN outputs
All mentioned options are opto isolated with respect to input signal and power supply.
The output cards are easily installed on the meter’s main board by means of plug-in connectors and each one activates its own
programming modules that provides complete software configuration.
Additional capabilities of the unit with output options:
Control and processing of limit values via ON/OFF logic outputs or proportional output (4-20mA, 0-10V).
Communication, data transmission and remote programming via serial interface.
For more detailed information on characteristics and mounting, please refer to the specific manual supplied with each option.
To Next Page
Loading...