Engine distributors WSG-1068 - Page 255

239

WSG-1068 STARTER SYSTEM
Starter No-Load Test
CAUTION: Make sure that the starter is
securely mounted in bench vise while energizing,
as starter will move or jump.
Wire Color Relay
Terminal
Circuit
Description
Lt Bl / Pink
30
Voltage to
Starter
Red / Lt Gn
86
Relay Coil
Power
Lt Gn / Pr
85
To GCP
Lt Bl / Pink
87A
Ignition Feed
W / Pink
87
Auxiliary Run
Output
NOTE: All readings are made with connector attached to
relay and back probing connector using a paper clip and
fully charged battery.