EN109-1665751-44
9.2 Use of the function buttons
9.2.1 Speed buttons
The speed buttons are on the left-hand side of the control panel. The speed is displayed at the bottom left of
the information screen [1] and shows how fast you are running or walking. The minimum band speed is 0.4
km/h. The maximum speed which can be set is 18 km/h. The speed can be set or changed by pressing the
speed buttons [2]. Pressing the + button increases the speed in increments of 0.1 km/h. The – button
decreases the speed in increments of 0.1 km/h. If you press and hold down one of the speed buttons, the
speed will increase or decrease continuously. The speed shown is the actual speed.
You can increase or decrease the speed at any time. However, the change in speed will take place with a small
delay. For safety reasons, the band speed will increase gradually. A flashing arrow next to the speed displayed
(figure 6) indicates that the band has not yet reached the newly selected speed. An increase in speed is
indicated by an arrow pointing upwards. A decrease in speed is shown by an arrow pointing downwards.
9.2.2 VIEW button (change screen button)
Apart from providing access to the Default settings (see ‘System settings’), the VIEW button [3] does not yet
have a specific function. This feature has been provided with future expanded functions in mind, such as the
ability to alternate between screens with different layouts and in order to show details of the current training
session.
To Next Page
Loading...
Need help?
General