Enter the day using the central controller
and press OK.
Enter the month using the central controller
and press OK.
Then enter the year using the central
controller and press OK.
You will automatically return to the Date &
time menu. The modified date will be shown
at the right of the menu bar.
Use the same method to change the time.
10.7.2.e Quick start – energy
The default setting is:
Quick start – Energy = ON
This means that the Quick start function will
automatically calculate the energy consumed
(calories burned) during the use of the
treadmill, based on the body weight of the
user/patient (extra screen).
The automatic energy calculation can be
deactivated by selecting Quick start – energy
and pressing OK.
Then select the Off setting using the central
controller and press OK.
To Next Page
Loading...