EN109-1665751-44
10.7.5 Service
The Service setting is a secure setting which may only be accessed by a service technician who has been
authorised by the manufacturer in the event of a technical fault or maintenance (see the EN-Motion Service
Manual for further information about the use of this function).
Should your EN-Motion treadmill develop a fault, contact your supplier or Enraf-Nonius B.V. (the Netherlands).
10.7.6 System information
The System information menu contains information about the software versions of the various components
(firmware). This function allows you to check quickly and easily whether your EN-Motion treadmill has the latest
version before installing a firmware update.
From the main menu, select the System
settings function using the central controller
and press OK.
The System settings screen will appear. The
current software version will be displayed at
the bottom right of this screen.
Press OK.
To Next Page
Loading...