A new screen, Maximum speed (for
Autospeed), will appear.
The maximum speed is an extra safety
feature (a kind of ‘speed limiter’) which
prevents the band accelerating
unintentionally to the maximum speed
(18 km/h).
Enter the desired maximum speed
using the central controller and press
OK (default setting = 5 km/h).
The Main menu will appear and the
indicator lamp will now illuminate
constantly, to show that the Autospeed
function is ready (on stand-by).
From the Main menu, select the
Quick start function and press OK to
start the training session.
A screen showing the flashing text
‘START WALKING’ indicates that the
training session will take place with
automatic speed adjustment
(Autospeed). The band will now start
to move.
Comment: if ‘Calories burned’ has been activated (see 10.2 Quick start), a screen in which you must
enter the user’s weight will first appear after you have confirmed the selection of the Quick start function.
Then press OK to start the training session.
10.6.2 Likewise before the start of the training session, but this time from a submenu
The training (for example Quick start or Exercise goals) has therefore already been selected but the band is
NOT YET IN MOTION.
This means: first SELECT TRAINING SESSION AND ENTER SETTINGS, then SELECT AUTOSPEED and
only then START THE BAND (using the Autospeed function).
Step 1 SELECT TRAINING SESSION AND ENTER SETTINGS
From the Main menu, select the desired function (for example Quick start) and press OK.
The so-called data screen will appear (unless ‘Calories burned’ has been activated; in this case, first
enter the weight). Do NOT yet start the band!
Step 2 SELECT AUTOSPEED
Press the AUTO button. The indicator lamp will now start to flash (green).
If the security function is switched off, the response profiles screen will also appear.
If the security function is activated, however, the padlock screen will first appear. In this case, first
enter the code. Then select the desired profile and press OK.
Now enter the desired maximum Autospeed speed.
Step 3 START THE BAND
Press OK to start the band automatically. A screen showing the flashing text ‘START WALKING’
indicates that the training session will take place with automatic speed adjustment
(Autospeed). The band will now start to move. The indicator lamp will now illuminate constantly,
to show that the Autospeed function has been activated.
To Next Page
Loading...