EN109-1665751-44
10.7 System settings
The System settings function allows you to change some of the values set by the manufacturer.
These are the settings:
• Language
• Default settings
• Personal protocols
• Calibration
• Service
• System information
If you would like to change the values (presets) selected by the manufacturer, you can use this menu to
change the settings. The following settings can be called up and changed without an access code:
• Language
• Calibration
• System information
The other settings are secured and can only be changed by the therapist or supervisor. You must carry out a
special procedure to open the presets menu; this is to prevent changes being made by unauthorised parties.
• Default settings
• Personal protocols
• Service
In principle, the latter setting may only be called up by a service technician authorised by the manufacturer, in
the event of a technical fault or maintenance.
Secured settings are indicated by means of an icon (padlock).
10.7.1 Language
From the main menu, select the System
settings function using the central controller
and press OK.
Select the Language setting using the
central controller and press OK.
The list of available languages will appear (in
alphabetical order).
To Next Page
Loading...
Need help?
General